Search
Browse by Product
Browse by Van Make
Payment Options
Description
Battery Protector - 200A 12/24V
Programmable Battery Guard is the ideal solution for operators and installers,
when batteries need to be protected from heavy discharge due to additional loads
being fitted.
Installation: the simplicity of connections makes it ideal for both OEM and Aftermarket installations.
Ten Voltage Settings: the system has 10 voltage settingsfrom 10 - 16V that are easily set by the vehicle builder/installer
Manual Isolation: there is also the option to wire in a switch for remote manual
isolation of the loads.
Alarm: option available to sound buzzer/alarm after 12 seconds at low voltage
setting if there is no change in the voltage after a further 90 seconds the BG will shut
down the loads and the alarm will be stopped.
Overvoltage: at overvoltage 16V (32V) the BG will shut down immediately to protect
the equipment and pulse the alarm to alert the operator.
BG40 Technical Specifications
Maximum load (shut down current) 200A (45A)
Dual Voltage - auto deyects if fitted to 12v or 24V
Peak Current - 480A - shuts down at overload after 5 secs, start-up after 1 min
Watertight IP66 enclosure
Pt no: BG200
Fitting Option Information...
Supply Only
Workshop Fitting
Mobile Fitting
When you order a product as "Supply Only", we'll deliver the product direct to your chosen address. You will be responsible for the fitting of the product (unless you ask for our assistance).
- Visit our Supply Only page for more information
- Close this info box
When you order a product for "Workshop Fitting", it will be reserved from stock held at our installation centre. After you've completed the checkout process we will contact you to confirm a mutually convenient time for fitment to take place at our workshops in Glasgow.
- Visit our Supply & Vanax Fitting page for more information
- Close this info box
- Visit our Supply & Vanax Fitting page for more information
- Close this info box
When you order a product for "Mobile Fitting", it will be reserved from stock held at our installation centre. After you've completed the checkout process we will contact you to arrange a mutually convenient time for fitting at your chosen location. Our mobile fitting team will bring all products you have purchased for installation on the day selected. Please remember your van must be parked on private land during installation.
- Visit our Supply & Mobile Fit page for more information
- Close this info box
- Visit our Supply & Mobile Fit page for more information
- Close this info box